Number of views:
Number of views:
Product serial number
PU100 is a reactive black primer produced under the strict supervision of quality assurance system with the polyurethane as the base material. It can react with the moisture in the base material and air to solidify, improving the adhesion between polyurethane and the base material It has an outstanding covering power and UV stability. This product contains no chlorinated hydrocarbon or aromatic solvent.
As a binding accelerator, PU100 improves the binding ability of polyurethane adhesive and the glued base material. Generally, it is used together with PUHH cleaning and activating agent, however PU100 primer can also be separately used on the basis of pretest qualification. Due to the diversity of base materials and the difference of construction conditions, it is recommended to conduct experiment in advance for a better binding effect.
|Odor||Butyl Acetate Smell|
|Solid Content (%)||About 37|
|Optimal Coating Thickness (um)||Wet Film 50|
|Drying Time (min)||10-15(Depending on the film thickness,temperature and moisture condlion)|
|Activation Period||Less than 6 hours after aplcation|
|Operation Temperature (°C)||15~25|
|Application Temperature ( C )||-40~90|
|Density (g/cm3)||About 1|
Single Component, Wet Solidification, and Convenient Application;
Fast Drying, and Less Waiting Time;
No Corrosion and Penetration Pollution on Base Material;
Good Aging Resistance Property;
Aluminum Bottle Package: 100ml.250ml and 1000ml.
Transportation and Storage
Kept in Cool Place and Kept Away from Fire;
Frost Susceptibility: N/A
Recommended Storage Temperature:5"C - 25"C;
Guarantee Period: 6 Months in the Original Package
The ilustration of our products stated above is based on our current knowledge and practical experience. According to different operational environment and target, the operational process may be different. Therefore, we sincerely propose: prior to the application of our products, sufficient experiments shall be conducted in advance to ensure the products to conform to the construction process. We refuse to be responsible for any consequences caused by any purposeful act, any behavior against the technical regulations or oral expressions.
Since the primer is inflammable and highly volatile, they shall be kept away from fire, and the ventilation of the construction environment is required. No contact with the skin or the eyes. If inadvertent contactU100 1 happens, rinse with a large quantity of clean water and see the doctor.
The pretest is the necessary condition for the good adhesion.
Contact us for clarification of any questions.
We could not find any corresponding parameters, please add them to the properties table